How much power should i be making once meth injected??

[The Godfather]

Originally Posted by RICE RACING

http://www.amsperformance.com/pdfs/maxpower.pdf

^ Have a read of this mate, its most relevant to you

So far as kits Richard makes the best, send him an E-Mail or PM I'm sure he can guide you on that subject.

interesting read and car was very similar to mine all that was gained was 37hp so yeah not a viable source of power.. looks like i will just run some c16 as the gains from c16 are had at same psi and rpm as my 270kw and should see significant gains. with zero outlay costs.

i will eventually look back to water/meth injection but cooling intake temps could also be done with a dry ice box or cryo kit etc...

[RICE RACING]

Originally Posted by The Godfather

interesting read and car was very similar to mine all that was gained was 37hp so yeah not a viable source of power.. looks like i will just run some c16 as the gains from c16 are had at same psi and rpm as my 270kw and should see significant gains. with zero outlay costs.

i will eventually look back to water/meth injection but cooling intake temps could also be done with a dry ice box or cryo kit etc...

I think you have missed the point with this.?

W/M gives massive gains and its running costs are 1/10th of needing to buy C16 + its much kinder on your engine (that's been proven showing lower peak cylinder pressures along with increased BMEP = less stress for more power) .

The only missing element you need to take care of is your ignition system capacity *you will read that in the article I gave you*

So far as power production goes nothing will ever match W/M, durability wise its way out in front, cost wise after initial outlay its a no brainer...... and legality well, its the only thing you can run period and still enjoy your "road car".

if you want a simple one off hit of increased output, then you buy "power in a can" (C16) that is the most cost effective for a once off hit, long term its crap though, just as methanol is crap too or any substitute for petrol as your base fuel. W/M injection is the ideal, its in no way the easiest and lots of people misunderstand it or what its about and what you can do with it. But make no mistake nothing will make more power than that will while reducing stress on your engine at the same time.

[RICE RACING]

To give you an idea of why we love it so much.

I have a customer who runs a RX3 drag car with small 28"x9" rear slick and he uses C16 gasoline main fuel along with my pre turbo water/methanol injection system, this runs 37psi and does 8.3 seconds @ 162mph...... but the best part of it all is that the engine lasts, and has done 4 times more work than it ever has before with nil compression loss. He will never run another drag car without it for the increased durability alone to use his words & its simplicity and low maintenance V's running a pure methanol fueled car.

Engines are far less stressed when they are water injected, increased power is only but one part of why we are big fans of it.