#1
|
|||
|
|||
Confirming ECU Connections
I just want to make sure I'm reading the diagram below correctly;
1. I am only using IDC so the MAP sensor connection to pin 6 is not required (the MAP option is not progressive, on/off only - correct?). 2. IGN-SW #2 is pin 19 3. No external engine management for map switching, so the MAP SW connection is not needed. 4. FUEL INJ (-) is pin 11 5. OE Boost solenoid is pin 27 |
#2
|
|||
|
|||
Re: Confirming ECU Connections
My answers in Green...
Quote:
__________________
Richard L aquamist technical support |
|
|