#1
|
|||
|
|||
Cammy's EVO VII - for road & track
Hey everyone,
Install is not finished 100% yet as my car is still waiting for its new motor to be built . But I thought I would share my progress and update as the build continues. Howerton Engineering tank Running the line through the floor of the boot ....... and under the car with the fuel lines. FAV unit sits under the airbox when it goes back in Looking for power for tank LED's Power found in the tail lights. LED's FTW !!! |
#2
|
|||
|
|||
Re: Cammy's EVO VII - for road & track
Control Unit wired up to sensor's. still need to do the power. Gauge in central easy to read area. Drilling hole for jet. Tapping holes. ( finding NPT taps in my town ain't easy ! ) Yeah I tapped it. adapter in thread ready for jet. Jet in. LC1 - let the tuning begin..... when I get an engine anyways.... Last edited by cammy; 23-08-2010 at 12:02 AM. |
#3
|
|||
|
|||
Re: Cammy's EVO VII - for road & track
Forget intercooler pipe jets, this shit is the real deal.
Thanks Jeff @ HE for the always great service ! HE FTW
__________________
ಠ_ಠ 2001 EVOLUTION VII - 2.4L + AQUAMIST
|
#4
|
|||
|
|||
Re: Cammy's EVO VII - for road & track
Beautiful set up mate, I love EVO's
__________________
http://www.riceracing.com.au RICESP > F40 > Zonda > ZR1 Water Injection Specialist "Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!" |
#5
|
|||
|
|||
Re: Cammy's EVO VII - for road & track
thanks mate love the work on the RX-7 also !
I will take more photo's when I drill and tap the new threads for the direct port jets and as the new motor goes in and get turned over for the first time.
__________________
ಠ_ಠ 2001 EVOLUTION VII - 2.4L + AQUAMIST
|
#6
|
|||
|
|||
Re: Cammy's EVO VII - for road & track
Very nice install.
__________________
Richard L aquamist technical support |
#7
|
|||
|
|||
Re: Cammy's EVO VII - for road & track
Thank you Richard. Don't worry to much about the BS thread on EvoM, people with half a brain can see through that little desperate grab at marketshare....
Jets being placed on the underside of the intake manifold, for a clean install.
__________________
ಠ_ಠ 2001 EVOLUTION VII - 2.4L + AQUAMIST
|
#8
|
|||
|
|||
Re: Cammy's EVO VII - for road & track
It is annoy to read those threads, it is not a nice way to grab market share.
The tapped holes are nice and straight. it is going to look great and functional. I can see that you are very careful on covering up the tank so no deris will be introduced accidentally.
__________________
Richard L aquamist technical support |
|
|