![]() |
#1
|
|||
|
|||
![]()
I set the "SC" so that only 6 bars light up on the gauge when spraying. I set WL to full CCW, and WH to full CW.
i triggered the system and turned the WL CW but the "B" never distinguished? tried to set the WH and when that went full CCW it never distinguished either? |
#2
|
|||
|
|||
![]()
The earlier model of gauge, when WK is set too low, it will detect the flow sensor's minimum output voltage of 0.5V. Advance the WL a few clicks clockwise unril the "B" light goes away. This will be your minimum WL position for the future.
__________________
Richard L aquamist technical support |
![]() |
|
|