#11
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
Lastly, check for possible cable reversal:
__________________
Richard L aquamist technical support |
#12
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
any updates?
__________________
Richard L aquamist technical support |
#13
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
Hi
I change the main dash black rj45 cable with a brand new one HE sent me and still failsafe is ON, then I changed the gauge and does the same thing, failsafe is on.. Anything else to check? |
#14
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
Can you take a picture of the inside of the controller. I like to see the settings.
__________________
Richard L aquamist technical support |
#15
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
I tried BHD link to disable failsafe and still both leds are lit! ;(
If the thresshold is at 60% IDC wont it trigger a failsafe (both leds on) as the injection bar is inside the calibrated failsafe window at the gauge? |
#16
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
whats your email?
|
#17
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
trim settings
|
#18
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
after you see this I will upload trims pic, I am exceeding quota
|
#19
|
|||
|
|||
Re: Failsafe (WI and WL) always ON
Send it to me at richard-AT-aquamist.co.uk. I need to see the entire circuit board.
Richard
__________________
Richard L aquamist technical support |
|
|