#1
|
|||
|
|||
help matching omni 4bar map sensor to hfs4 range
has anyone done this, could they help me. on the manual it says 5v, 2bar or a 3.5bar map sensor. i have an evo8 running an omni 4bar wanting to use boost for meth flow.
|
#2
|
|||
|
|||
Re: help matching omni 4bar map sensor to hfs4 range
The range selection is only useful for the threshold trimmer to start at 1 atmosphere. The rest of the span is not important as all MAP sensors have 0-5V output.
For a 4-bar map sensor, select 3.5bar option.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: help matching omni 4bar map sensor to hfs4 range
thanks Richard
|
|
|