#11
|
|||
|
|||
Re: 997 turbo .. something is going wrong
I tried to active the system today but the same issues i wrote you yesterday !!
But after i did some changes to the PWM unit from inside , it made the gauge not working at like yesterday , only the yellow light apeared in the gauge , then after 5 secs it off !!! So i think the gauge is damaged !! |
#12
|
|||
|
|||
Re: 997 turbo .. something is going wrong
1. Have you tried with the factory cable?
2. Unplug the blue harness and see if have made a difference (with original gauge cable) .
__________________
Richard L aquamist technical support |
#13
|
|||
|
|||
Re: 997 turbo .. something is going wrong
Quote:
And nothing !!! Am afraied that the gauge damaged and PWM is failed !! I |
#14
|
|||
|
|||
Re: 997 turbo .. something is going wrong
You need to return the controller and gauge to us for repair. We don't charge but you have to pay shipping on both directions.
Email me: richard[at]aquamist.co.uk
__________________
Richard L aquamist technical support |
#15
|
|||
|
|||
Re: 997 turbo .. something is going wrong
Email was sent sir .. Thanks for your support
|
#16
|
|||
|
|||
Re: 997 turbo .. something is going wrong
Both gauge and controller were severely damaged.
It makes no difference which version of HFS-3 you have in the past. It will do the same damage.
__________________
Richard L aquamist technical support |
#17
|
|||
|
|||
Re: 997 turbo .. something is going wrong
problem solved
we tried the system and it worked perfectly big thanks to richard for his help |
|
|