#1
|
|||
|
|||
Nozzle sizes
Hi guys i've just jioned the forum as i'm thinking on building a water/meth kit for my car.
I have a 92 VW Corrado G60, 190-200 bhp, chipped and pulleyed (68mm), running standard injectors (green 280cc) and approximately 1.0 bar of boost. Can anyone advise me on what size nozzle i would need to run in it? Regards Last edited by maaxxyy; 15-05-2014 at 01:19 AM. |
#2
|
|||
|
|||
Re: Nozzle sizes
around 200-300cc/min nozzle for M50/W50 is a good start.
__________________
Richard L aquamist technical support |
|
|