waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 30-06-2015, 06:22 PM
jueshen jueshen is offline
Junior Member
 
Join Date: Nov 2011
Location: South Africa
Posts: 17
Default Re: 15 A Fuse keeps blowing

Tx Richard I will do that if it happens again but I think I found the fault.
the fuse blew today again, I replaced the fuse and the system did not work
I replaced the relay, luckily I had a 5 pin relay of same spec (I see the female side on the HFS system is blank for the 5th center pin)
and the system worked again.
I think the relay was the fault all along and caused the fuses to blow until the relay finally gave up.
The clunk sound from the pump when turning the car into accessory mode is much louder than before... and its still using the same amount of meth it used to...
I really have faith in this system, I know a lot of other guys running other brands of wmi systems and all of them have replaced pumps and controllers in under a year!
6 years and still going strong baby!
this kit was bought from FRC aquamist reseller in SA (branded FRC as well on the pump)

Last edited by jueshen; 30-06-2015 at 06:30 PM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.