#11
|
|||
|
|||
Re: HFS2 Question - 1.8T
Thanks for your help thus far
when testing with Jumper on SYS my flow pattern is the same and has not changed over the years so i know the pump pressure is still correct. but just out of curiosity how do i adjust the pump pressure? - i read that the the allen key needs to be turned clockwise on the pump could you please post some pictures this weekend i will be removing and replacing the nozzles and sorting out any leaks as i dont have bungs welded i tapped into the boost pipes around the MAP sensor wonder if i will cool more / use more with the pressure increase |
#12
|
|||
|
|||
Re: HFS2 Question - 1.8T
There is only one allen key on the front side of the pump, I don't think you need a picture.
1/16". clockwoise to increase pressure. I have no idea by how much.
__________________
Richard L aquamist technical support |
|
|