#1
|
|||
|
|||
Checkvalves
Hi,
I have a "standard" HFS3 kit that I bought in 2014. So equiped with standard jets (no cheks valves). I use 2 jets, 1mm and 0.9mm. 100% meth. PreThrottle injection. I red several time on the forum that it's far better to have 1 checkvalve by extra jet. I still have the jets (supplied in the kit), what checkvalve could I use? Where can I find some? Thanks! Laurent |
#2
|
|||
|
|||
Re: Checkvalves
Unless the hose between the jets is longer than 2 feet, it may not be necessary.
Why putting a jet at the throttle?
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: Checkvalves
Not at the trottle but just after the atmostpheric BOV (30cm from the throttle) in order to avoid meth vapors in the engine bay (It will be a 100% meth use)
|
#4
|
|||
|
|||
Re: Checkvalves
Regardless of where the jets is in the charge pipe, meth will get blown out in any case.
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Re: Checkvalves
Ok!
thanks |
|
|