#1
|
|||
|
|||
Meth versus fuel IDC question
Hi all,
I am fine tuning my MAF scaling to account for all the meth I am injecting, and would like to know how the HFS4 initiate meth injection when the THRESHOLD, GAIN and P/I-R are all at mid point (default setting)... As an example, when the trigger point is at 42% F-IDC, does the HFS4 meth injection match the F-IDC of 42% (F-IDC = HFS4 DC), or does it start very progressively and only inject at say 10% DC!? |
#2
|
|||
|
|||
Re: Meth versus fuel IDC question
P/I-R at mid point, meth follows 50% on MPS and 50% on IDC. If you want IDC only, set this trimmer fully clockwise.
__________________
Richard L aquamist technical support |
|
|