waterinjection.info  

Go Back   waterinjection.info > Other > Gallery - NEW

Reply
 
Thread Tools Display Modes
  #1  
Old 18-09-2004, 02:52 PM
Greenv8s Greenv8s is offline
Member
 
Join Date: Sep 2004
Location: Milton Keynes
Posts: 26
Default

Quote:
Originally Posted by Richard L

Great care has to be taken in winter when you spray water/menthanol mix onto a large surface area of the rotor, it will freeze and ruin you S/C for good. It is better to disable this spray system in cold winters with sub-zero temperatures.
Ooh, that's a failure mode I hadn't considered! So, if cooling from upstream fuel injection manages to pull the s/c rotor temperature below the freezing point of my WI mix, then the injected water might freeze inside the s/c when I come on boost. From the sound of it, that could be nasty! I think I will have to monitor the s/c temperatures while cruising with upstream fuelling enabled, and see whether the s/c temperature is getting low enough for this to be an issue. A water/antifreeze mix turns to mush rather than solid ice when it freezes; do you suppose this would still put the s/c at risk?
__________________
Peter Humphries (and a green V8S)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.