![]() |
#11
|
|||
|
|||
![]()
Yes, but only with the FDC jumper test linked and the SC calibration linked.
Not during normal flow testing. |
#12
|
|||
|
|||
![]()
it appears to be one of the following:
1. yellow harness (sensor cable) 2. sensor jammed 3. controller. if at anytime the red and yellow cable was swapped accidentally, It will damage the part of the circuitry that decodes the flow. Can you return the above to us and we will fix/replace at no charge. Shipping address: (write "return to manufacturer for repair" or tax will be charged. Value is $10) ERL Ltd Iroko house Bolney Ave. Peacehaven East Sussex BN10 8HF England T: +44 1273 581007 F: +44 1273 581555 USPS is very reasonable.
__________________
Richard L aquamist technical support |
#13
|
|||
|
|||
![]()
Can do, I will have it out next weekend and let you know when it's on the way, with a note attached.
Thanks Mark |
#14
|
|||
|
|||
![]()
please send:
1. controller 2. flow sensor tube.
__________________
Richard L aquamist technical support |
#15
|
|||
|
|||
![]()
Excellent, the wiring removal was at least a 1½ - 2 hour job... Lol
Flow sensor tube only, no FAV T, will do. With no wiring removal, will be in the way to you tomorrow, thanks again. |
#16
|
|||
|
|||
![]()
No need to remove wiring, justhe controller, just flow sensor assembly.
__________________
Richard L aquamist technical support |
#17
|
|||
|
|||
![]()
Richard, just making sure you got the parts, tried e-mail but no reply, and can't send you PM.
They should have been there approx 2 weeks ago, there's no tracking to England with USPS. Thanks. |
#18
|
|||
|
|||
![]()
I was away. will check today
__________________
Richard L aquamist technical support |
#19
|
|||
|
|||
![]()
Richard, any word yet on my repair?
|
#20
|
|||
|
|||
![]()
Richard, it's been a month and a half since I sent those parts, is there I problem I should be aware of, or have you tried contacting me in another way besides the forum?
I don't think I missed something from my e-mail. |
![]() |
|
|