#11
|
|||
|
|||
Re: Pump is activated after a while when the motor is not running
|
#12
|
|||
|
|||
Re: Pump is activated after a while when the motor is not running
Here is the wiring diagram that I sent years ago.
Connect the Aquamist red wire to the pin 8 (green/yellow wire) in orange connector in the engine bay black box where the ECU is. http://imgur.com/a/JTJWC This works in european models. Last edited by okkimi; 24-09-2016 at 07:21 AM. |
#13
|
|||
|
|||
Re: Pump is activated after a while when the motor is not running
There is nothing wrong with the diagram. The red wire of the grey harness should be connected to D22.
__________________
Richard L aquamist technical support |
#14
|
|||
|
|||
Re: Pump is activated after a while when the motor is not running
My car does them same...
|
#15
|
|||
|
|||
Re: Pump is activated after a while when the motor is not running
check your wiring.
__________________
Richard L aquamist technical support |
|
|