#211
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
All is well after a few mis-communications. I am looking forward to work with you on the install.
__________________
Richard L aquamist technical support |
#212
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
Quote:
Quite a while back, I was one of the first to purchase the HFS-6 for my RX7 FD, I bought it with the summer, set to 550 ccm primary/850 ccm secondary by Richard, I allso talked to Richard by phone because he was interested in, how it all worked out on the rotary as he was in the beginning of the WI on rotaries, as time has gone I have still not managed to install my HFS-6 setup, but are very close now ;o) the only thing I am confused about now is the above statement, I am still running stock injectors (550 primary/850 secondary) and will not have to inject water/meth before 100 BHP, so as I understand of the above, I do NOT have to install the summer, but only have to hook the HFS-6 to the secondary injector ? my next question is, I will wire/splice it to my power FC ECU, to get the signal from the secondary injector, I am not totally sure what terminal/number/coulor on the power FC ECU the secondary injector is ? according to Richard (and what I can see) I would have to splice it into the terminal 2B, LG (4Z) and the wire coulor should be yellow with a blue stribe, right ? if I WILL have to splice in the summer to see my 550 ccm injectors, according to Richard (and what I can see) I would allso have to splice it into the terminal 2B, LG/B (4Y) my car is a 93 eurospec. lefthanddrive car. I am really looking forward to hear from you guys and hope you can help me out with this, thank's in advance ! Rene Barfred DENMARK |
#213
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
Rene,
I missed this post, sorry. 1. You can run the HFS-6 without the summer as you are still on stock injectors. 2. I believe the second injetcors are light green, pin 4Z. 3. You were right on light green, pin 4Z. 4. What signal is on terminal 2B? Richard
__________________
Richard L aquamist technical support |
#214
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
PM sent reguarded the desire to purchase a summer and HFS-6 system if available or HFS-3 system if the HFS-6 system wont be available for a long time again.
|
#215
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
Hey Richard! Are these kits still for sale? If they are can I get a Summer and HFS 3 System? Please PM me or email me at jonnyduani@gmail.com
THANK YOU! |
#216
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
Its prob easier if you just email him richard@aquamist.co.uk
I just purchased an HFs3v2 system and RX7 summer from them a week or so ago hes very helpful over email |
#217
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
He just emailed me thanks!!!
|
#218
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
Hey guys,
Did Richard put out any info on how to adjust the summer for larger injector sizes? I remember Richard saying that it wasn't difficult to do but I have no idea on how to do it. |
#219
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
which summer version is this?
__________________
Richard L aquamist technical support |
#220
|
|||
|
|||
Re: Rotary "Summer" Unit GB interest
Sorry for the late reply. The one before this GB. I believe it is a v2.
|
|
|