#21
|
|||
|
|||
Re: Aquamist 2d Install ? on an FD?
It appears the wiring can be taken from the ECU. See below:
__________________
Richard L aquamist technical support |
#22
|
|||
|
|||
Re: Aquamist 2d Install ? on an FD?
ok its been a long time I got it all wired in , and I almost got hte car on the road
the only thing I'm lacking now is some sort of way to inject the water into the engine , just post IC ?? and also http://www.howertonengineering.net/p...Weld-Bung.html will this work with the aqua mist 2d ? |
#23
|
|||
|
|||
Re: Aquamist 2d Install ? on an FD?
hmm I have a question I dont know if this is the correct place to ask . but maybe someone can point me in the right direction ..
So when the A/I is working and functioning correctly . should it affect my Air/fuel Ratios? will it read richer as the alcohol burns ? or will it read as if it wasn't there . |
#24
|
|||
|
|||
Re: Aquamist 2d Install ? on an FD?
how do I adjust when it injects water?
its currently injecting at around 7 PSI . I'd like fori t to inject earlier |
#25
|
|||
|
|||
Re: Aquamist 2d Install ? on an FD?
Having no experience with the kit itself I would def take either of the secondary injectors. Simply because you only need water in a boosted area, and the sec inj are on when being boosted. Using the primaries could also work but they can reach consoderable duty cycle with no or very low boost just before the secondaries get ramped in.
|
|
|