#21
|
|||
|
|||
Re: BMW Mini-R56 USDM wiring
It that a typo on the website? Just from the scale of things it does look to be 3/8 BSP.
|
#22
|
|||
|
|||
Re: BMW Mini-R56 USDM wiring
All the aquamist HFS-xxx pump with 3/8BSP-M to 1/8BSP-F adaptor as standard.
Adding this fitting will make the joint very flexible.
__________________
Richard L aquamist technical support |
#23
|
|||
|
|||
Re: BMW Mini-R56 USDM wiring
Ah, ok. This is what happens when you take 8 months to complete the install.
Should i order from you or Jeff? i'll also start a thread about my install. Waiting for my gauge mount also now. |
#24
|
|||
|
|||
Re: BMW Mini-R56 USDM wiring
It is completely up to you. If you have been dealing with Jeff before, you can continue. I am here for your technical support regardless.
__________________
Richard L aquamist technical support |
#25
|
|||
|
|||
Re: BMW Mini-R56 USDM wiring
Hi richard
Any updates for n18 to use hfs4 or hfs3? Wanting to use your products on my mini. Quote:
|
#26
|
|||
|
|||
Re: BMW Mini-R56 USDM wiring
Both H3 and H4 will work on the new mini. I just don't have the DME pin out details to make a drawing.
I believe they will be the same.
__________________
Richard L aquamist technical support |
#27
|
|||
|
|||
Re: BMW Mini-R56 USDM wiring
I just have it installed in a GP2, so it will work in N18 engines. Now I need to learn how to set it up and read the gauge.
|
#28
|
|||
|
|||
Re: BMW Mini-R56 USDM wiring
This is good news. I was unable to get the new mini DME pinout. Now I don't have to. Thanks for the update.
__________________
Richard L aquamist technical support |
|
|