![]() |
|
#1
|
|||
|
|||
![]() |
#2
|
|||
|
|||
![]()
The connection is good.
So the water pump comes on when the engine idles?
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
![]() Quote:
The pump comes on when the engine idles. The pump works with a big noise ( as in the video that i sent you yesterday ) |
#4
|
|||
|
|||
![]()
OK, let me try to solve this problem. Need your help.
Can you unplug the grey harness, tell me if the pump stops.
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
![]() |
#6
|
|||
|
|||
![]()
This is good so far..
Tell me what wires are used on the grey connector and where are they connected to.
__________________
Richard L aquamist technical support |
#7
|
|||
|
|||
![]() |
#8
|
|||
|
|||
![]()
OK, so only the red wire is connected.
Can you out the grey harness back on and pull out the green harness, let me know if the pump stops. Can you see any led on the circuit board lights up with and without the green harness plugged in.
__________________
Richard L aquamist technical support |
#9
|
|||
|
|||
![]()
When we pulled out the green harness , the pump working again.
When the green harness is plugged , there is a lamp lighting on the circuit , I recorded a video , you can see the lighting lamp. http://youtu.be/91FcbH1JPvc When the green harness is unplugged , there is no lamp lighting but the pump still comes on. |
#10
|
|||
|
|||
![]()
You wrote:
"When we pulled out the green harness , the pump working again." What does this mean?
__________________
Richard L aquamist technical support |
![]() |
|
|