#311
|
|||
|
|||
Re: RICESP Water Injected RX7
4.7 or 4700mBar (MAP) to be 100% exact, is the limit I run currently
__________________
http://www.riceracing.com.au RICESP > F40 > Zonda > ZR1 Water Injection Specialist "Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!" |
#312
|
|||
|
|||
Re: RICESP Water Injected RX7
Hallo Peter,
long time since your last post. I've one question which came to my mind. How do you deal with turbo lag, as for your power you propably have a huge turbo. Best regards |
#313
|
|||
|
|||
Re: RICESP Water Injected RX7
Quote:
Have not been on here for a while. These advances will go into a special dedicated car designed from the ground up to handle this level of power and utilizing the full scope of the advanced electronics package (special project I am planning), and this one (RICESP) will go back to a more normal specification befitting the special nature of the limited model it is (one of 25 original cars)... Will be back to the F40 beating set up Still Water Injected as all turbo cars should be
__________________
http://www.riceracing.com.au RICESP > F40 > Zonda > ZR1 Water Injection Specialist "Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!" |
#314
|
|||
|
|||
Re: RICESP Water Injected RX7
Over the next little while RICESP will have its 10th anniversary (yes I have had it almost 10 years!) and to celebrate the 'old girl' which will turn 20y.o.! will have a little make over.
The work has commenced, a few changes are underway, running a different turbo system, along with detail upgrades to other sub systems in the car as well. Somewhere between the two extremes, with a greater focus on an all round package and 'good' power output.
__________________
http://www.riceracing.com.au RICESP > F40 > Zonda > ZR1 Water Injection Specialist "Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!" |
#315
|
|||
|
|||
Re: RICESP Water Injected RX7
Matt, thanks for the video tonight, your car is a fucking rocket!@
90-140kmh test, in 3rd gear, it goes, and that is low boost ~19psi lol, beauty of the RICE RACING calibration is no guess work! its fine to 30psi Just need to wind it up if/once you get bored Matt quote: "Yes mate ! I'm running sticky rubber, 2nd just LAUNCHES and peels the pavement, 3rd hooks up as you can see..... It's only 18~psi ..... It spikes to 20 briefly as it comes on and dips to 18. So still a bit of work to do on the eFail2 but haven't been fussed as I'm still waiting on the kenne bell and it's pretty wild in current tune ! & Lmfao yeah mate it's sick and the fucken thing does this ALL day EVERY day, up and down the road (the boys in the BP 100mtrs from my house love watching it wheel spin up the road several times a day !) Even in 32c+ weather today, 50c intake temps and my passenger said "fuck it goes awesome on a hot day still !!" It's only going to get better mate, this thing livens right up at 20-21psi so we have plenty to show yet ! Liking at that video the boost was quite stable only falling off .5~psi the higher I run the more stable it gets so I think 21-22psi will be a sweet spot " https://www.youtube.com/watch?v=CZu-yziZG7Y
__________________
http://www.riceracing.com.au RICESP > F40 > Zonda > ZR1 Water Injection Specialist "Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!" Last edited by RICE RACING; 26-10-2014 at 01:05 AM. |
#316
|
|||
|
|||
Re: RICESP Water Injected RX7
New turbo and waste gate package on their way
Custom engine parts being finished too Wiring harness out ready for new components to be fitted up Lots happening
__________________
http://www.riceracing.com.au RICESP > F40 > Zonda > ZR1 Water Injection Specialist "Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!" |
#317
|
|||
|
|||
Re: RICESP Water Injected RX7
Pictures please Peter. Are you going for a smaller turbo? Or one if the EFR turbos??
|
#318
|
|||
|
|||
Re: RICESP Water Injected RX7
Quote:
Do have some 'interesting' developments on the go
__________________
http://www.riceracing.com.au RICESP > F40 > Zonda > ZR1 Water Injection Specialist "Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!" |
#319
|
|||
|
|||
Re: RICESP Water Injected RX7
I know! Iv just about stopped posting on sites as things have become tedious. Thread on rx7ckub has has three engines before the car has even done a couple thousand miles etc and is in his third turbo manifold and intake along with his second turbo......
|
#320
|
|||
|
|||
Re: RICESP Water Injected RX7
Quote:
Like last version of RICESP I'll post up when I have proper things to share that are no longer commercially sensitive and or of use to others at large simple. I think this set up will be the 'ultimate' I'm sure you and many others will love it. Will look towards commercial production of some or all elements of it.
__________________
http://www.riceracing.com.au RICESP > F40 > Zonda > ZR1 Water Injection Specialist "Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!" |
|
|