#31
|
|||
|
|||
Re: Control board not commanding FAV to open .
As I said earlier. I will check the internal of the FAV on Monday. Both. The coil failsafe was the original cause.
Remind me what car and jets you are using.
__________________
Richard L aquamist technical support |
#32
|
|||
|
|||
Re: Control board not commanding FAV to open .
Audi S5 and a 1.0mm -500cc jet spraying at the TB
|
#33
|
|||
|
|||
Re: Control board not commanding FAV to open .
Have you checked the jet for blockage before shipping all those parts back to me? That is the most obvious step to do first. Judging from the condition of the filter of the FAV inlet , worth checking the jet and the in-tank filter for blockage.
Can you send a a picture of the in tank filter? unless it is all new since you changed over to DI tank.
__________________
Richard L aquamist technical support |
#34
|
|||
|
|||
Re: Control board not commanding FAV to open .
Quote:
|
#35
|
|||
|
|||
Re: Control board not commanding FAV to open .
All tests are completed, every part is working fine (including controller. Only the FAV was broken it doesn't look very healthy from outside either.
We need to look at the installation now after you reinstated all the components. where you want me to return to? Pm me.
__________________
Richard L aquamist technical support |
#36
|
|||
|
|||
Re: Control board not commanding FAV to open .
Great news and thank you again! PM sent
|
#37
|
|||
|
|||
Re: Control board not commanding FAV to open .
Please update what the actual issue is on your system now that we have ruled out the equipment.
__________________
Richard L aquamist technical support |
#38
|
|||
|
|||
Re: Control board not commanding FAV to open .
Will do, soon as I have everything put back together! And thank you again!
|
#39
|
|||
|
|||
Re: Control board not commanding FAV to open .
So it must've been the FAV/relay... hooked everything back up last night, didnt change any of the cables etc.. and it's working perfectly again. Thank you very much for your help, glad its solved now!
|
#40
|
|||
|
|||
Re: Control board not commanding FAV to open ... not true
It will be the FAV coil. It could be damaged by prolong SYS test.
__________________
Richard L aquamist technical support |
|
|