waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 24-03-2022, 05:36 PM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default HFS4 Questions

1st of all its great to see the forum back online!

Have had my set WMI set up for years now though car wasn't driven much, back driving it now and just got a couple questions to rejog my memory and get best out the system. Garage who fitted it really did a poor job back in the day and Richard was a great help getting it sorted to be useable.

1. Using 0.6mm jet on a small 1.6 litre petrol turbo engine, if wanted to lower the flow from the jet is it best to use the 0.5 or 0.7 restrictor that's supplied?

2. Failsafe is set and on boost doesn't trip the failsafe, but I worked out the SC is only showing 3 or 4 bars. So is it possible to just adjust the SC forward a few clicks and check with the BAR link (red and blue harness removed), then move the WL and WH forward the same amount of clicks to keep the failsafe window in line?

Hope point 2 makes sense and is ok to do, otherwise its front bumper off job to get to the jet just after the IC !!

TIA
Reply With Quote
  #2  
Old 31-03-2022, 11:33 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: HFS4 Questions

it is better to set SC to display 5-6 bars and set WL and WH accordingly. WL is more adhere to the THRES setting.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 23-04-2022, 02:27 PM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Re: HFS4 Questions

hi richard

hopefully have time to get the SC set to show 5-6 bars in the coming days and then adjust the WL and WH accordingly,

If i was to run the jumper link to disable the failsafe on the control board, would that allow settings like THRES, GAIN, to be changed dependant on driving planned without then having to reconfigure the failsafe every time? Understand the "B" LED would always be lit then.

Then for WOT driving on track have the failsafe back to DHB to have the failsafe running?

Hope this makes sense!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:52 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.