Newbie with questions

[quick_8]

Hello All,

Newbie here with some questions, bought a HFS-4 system and looking to install it soon. Been reading lots of threads but nothing is giving precise measurements. Here are some questions

370" LS engine
Twin 67/66 turbos
90mm T/B


#1 How far from the T/B should the nozzles be? There is about 15” from my I/C to my T/B.

#2 When installing the dual nozzles, do you want them right across from each other or staggered in the intake tube? If staggered, how much offset distance between them?

#3 Where to mount the FAV at? Close to the intake tube?

[quick_8]

No one, has any info?.......

[rotrex]

I'd install them right after the IC. I assume you do not have any ridges etc. in the flow path from there're that could collect droplets.
You can mount them anyway you like. It won't make a difference in this type of install as the mist goes through bends, plenum etc before entering the cylinders.
I'd pay attention that you can access the jets easily for maintenance.