waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Injection Mixtures

Reply
 
Thread Tools Display Modes
  #1  
Old 06-04-2013, 06:41 PM
Flr Power Flr Power is offline
Member
 
Join Date: Apr 2013
Location: Canada
Posts: 62
Default Re: Water Methanol AFR Calculation

Ok, thanks, I had some numbers wrong in there.
So the right numbers are: I inject 12.5% meth x 0.44=5.5% more gas or around 0.5 AFR change.

I was close but not enough it seems since now it looks like I have to only trim 5.5% gasoline from my main fuel map at full load/boost.

Last edited by Flr Power; 06-04-2013 at 08:21 PM. Reason: Correction
Reply With Quote
  #2  
Old 09-04-2013, 10:27 AM
Liborek Liborek is offline
Junior Member
 
Join Date: Nov 2009
Posts: 9
Default Re: Water Methanol AFR Calculation

Quote:
Originally Posted by Flr Power View Post
I was close but not enough it seems since now it looks like I have to only trim 5.5% gasoline from my main fuel map at full load/boost.
Charge cooling effect can increase air mass trapped in cylinder which would partially compensate for increased fuel value. It depends on accuracy of determining actual airflow into the engine.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:09 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.