HFS3 initial setup query post install

[playback]

Originally Posted by Richard L

May be send me a picture of the undwrside of the circuit board and see if thay have configured the system correctly. Different models of direct-injection car has many variations feven from the same manufacturer.

Can you tell me the volatge reading of test pin16 at idle, cruising and WOT. Simple voltage test would be seeing a voltage spike when blipping the throttle.

Ask the shop to contact via email richard@aquamist.co.uk Unfornately I am away this weekend.

Will try get this info for you. Do u mean pic of the underside of the aquamist board where u make the adjustments ?

Test pin 16 at idle... um where would I find this pin ? And how could I measure the voltage on it... VAG Com or a multimetre ?

Thanks again for the help.