#21
|
|||
|
|||
Hi all, well Meth is supposed to be aggressive to rubber parts... I think to have discovered it by using aquamist systems... :lol: but it is not supposed onto metal components. That should be really too much aggressive...
|
#22
|
|||
|
|||
Rubber is pretty generic I have found many materials that have good compatability.
Here is a small list of "rubber like" materials O-Ring Materials Compatible with Methanol Aflas (0) Buna-N (Nitrile) (3) Butyl (1) Chemraz (4) Epichlorohydrin (0) Ethylene-Propylene (4) Fluorocarbon (0) Fluorosilicone (4) Hypalon (4) Kalrez (4) Natural Rubber (4) Neoprene (4) Nitrile, Hydrogenated (4) Polyacrylate (3) Polysulfide (0) Polyurethane, Cast (0) Polyurethane, Millable (2) Silicone (4) Styrene Butadiene (0) Teflon, Virgin (4) Vamac (4) |
|
|