waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

Reply
 
Thread Tools Display Modes
  #1  
Old 27-07-2019, 04:21 PM
Smoke them tyres Smoke them tyres is offline
Junior Member
 
Join Date: Jul 2019
Location: Oz
Posts: 1
Default Wiring of FAV

Hi guys,

I have been using water injection on a turbo engine for years now, but as I am converting my old car to fuel injection, I realise that technology has moved on.

I have chosen a Haltech 2500 ECU and am going to control the FAV with a PWM output that mirrors injector duty cycle from that.

As I am not using the Aquamist controller, I need to know how to wire up the FAV.

A diagram with a short explanation would help greatly.

Last edited by Smoke them tyres; 29-07-2019 at 12:39 PM.
Reply With Quote
  #2  
Old 30-10-2019, 10:25 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,898
Default Re: Wiring of FAV

you need to drive the FAV with a hi-speed PWM channel from Haltech. Many tried using the aux pWM output and got bad results. Ideally use a spare fuel injector channel.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 07:24 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.