#1
|
|||
|
|||
HFS-3 and Omni 4Bar MAP Sensor
Hi all
I was wondering if anyone has come accross this. I recently bought a HFS3 system and have also upgraded my stock MAP sensor to a Omini 4Bar MAP sensor. I have a 06 Subaru STI I have heard that you need to "tell" the HFS3 that this is the size MAP sensor you are using, i couldn't find anything in the manual about this. Has anyone had this or successfully done it? any help would be great!! Thanks!!! Last edited by naviuk; 09-06-2013 at 09:19 AM. Reason: added info |
#2
|
|||
|
|||
Re: HFS-3 and Omni 4Bar MAP Sensor
Which version of HFS3 do you have?
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: HFS-3 and Omni 4Bar MAP Sensor
Hey Richard.
Thanks for the reply and sorry took so long to reply, i didn't have the box at the time. how can i tell which version 3 it is? The Manual i have just says User manual v2.12 for HFS-2/3 pwm. Is there something on the main unit i can look for? I have sent you a PM, there is a issue i'm having now and not sure if it is the MAP sensor or something else i'm missing. Thanks!!! |
|
|