#11
|
|||
|
|||
Re: HFS-3 pump runs on after pull
Jeff is great, he does look after his customers very well. I will connect up with Jeff and do some diagnostic work as soon as he has received the board.
I do have a question. Is this prblem right at the start or recently happened? Richard
__________________
Richard L aquamist technical support |
#12
|
|||
|
|||
Re: HFS-3 pump runs on after pull
Quote:
Hopefully I'll have the new module in the next couple days and I will let you know how it goes. |
#13
|
|||
|
|||
Re: HFS-3 pump runs on after pull
I can't wait to see the old HFS-3 board.
The system could spray even when the valve was stuck open because the pump was not activated. Since the valve was not shut properly, you would see the prolong syray after lift off as the line was depressurising.
__________________
Richard L aquamist technical support |
#14
|
|||
|
|||
Re: HFS-3 pump runs on after pull
Quote:
Well Jeff sent over another board the other day, I slapped it into the customer's car and everything works exactly as it should! The old board is en route to CA for Jeff to look at, I assume it's next stop is England. I'm pretty curious to see what the problem is too, this one was a tough one. Thanks for all your help! Nick |
|
|