#1
|
|||
|
|||
Correct nozzle size and best nozzle location
Hi I have golf mk4 gti 1.8T k04 hybrid turbo 332hp, 600cc inj, 24psi, 3" maf, fmic. Using screen wash 30% meth
Thanks Last edited by bndynamix; 30-07-2014 at 11:40 PM. |
#2
|
|||
|
|||
Re: Correct nozzle size and best nozzle location
What system do you have?
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: Correct nozzle size and best nozzle location
Actually using devils own 200 psi pump and maf based progressive controller but have aquamist pipe work and have 4, 5 and 6mm aquamist jets.
|
#4
|
|||
|
|||
Re: Correct nozzle size and best nozzle location
The further away from the throttle the better.
The DO system is progressive but not linear. I would run a 0.6mm jet only. Large jet might over inject at low to medium load.
__________________
Richard L aquamist technical support |
|
|