2C injection table examples needed

[Duke M535ti]

Hello all,

First time poster. I have run a search and could not find any info on the following question.

I have a 2C system. I will be running the 2C with an Electromotive TEC3 system. I am looking for examples of duty cycle tables you are running your 2C with. The table has RPM vs MAP reading to determine the duty cycle of the WI pump. My tables are 16 X 16.

I have a 1985 M535i with a GT35R turbocharged M106 (3.5L) engine. I would like to use WI from 10-20 PSI.

TIA for any information.

Duke
1985 M535i