waterinjection.info  

Go Back   waterinjection.info > Other > Gallery - NEW

Reply
 
Thread Tools Display Modes
  #431  
Old 16-11-2018, 08:15 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: RICESP Water Injected RX7

And this is a R32 GTR fitted with a VQ35 twin turbo (EFR7163) and their mainline dyno making around ~890rwhp on 2800mB as a real world performance comparison.





Quote:
Originally Posted by RICE RACING View Post
Unlike the kiddie pretenders, these cars keep on running all thanks to pump petrol and water injection.

No guessing on E-Media Arsebook/Gagtube, no secret rebuilds after one dyno pull needing to get pushed off due to non running/broken engine, no hype, no snake oil E85............
I don't say we do it better, rather just make cars that are fast and durable. Stuff most others can only dream/post/blog about.

No doctored power claims either, just facts. Got a 13B turbo that accelerates harder? that can be driven somewhere? without a spare engine? love to see it!

__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"

Last edited by RICE RACING; 16-11-2018 at 09:05 PM. Reason: yo
Reply With Quote
  #432  
Old 25-12-2018, 02:10 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: RICESP Water Injected RX7

When looking to do professional WI integration this is the A Typical package we recommend, supply, fit, and calibrate.
WM50 is an integrated part of the full engine control system, feeding in live Aquamist status and flow rate along with other sensor inputs giving complete information to the ECU thus allowing total control over the engines calibration. This is a critical aspect in making the engines as durable as they have proven to be.

There are multiple layers of feedback and validations some down to the engine individual cycle level (at 9500rpm) which make the system counter any and all eventualities.
To date across multiple cars covering years and multiple thousands of hours of running inclusive of many full hours at maximum power we have not had a single failure and more specifically (to this thread) not a single issue related to water injection system being the cause of an engine detonation related event.... ever!

NOTE: not all systems are created equal, Life Racing and Syvecs matched to the Aquamist is a fantastic combination, there are literally thousands of hours of development time gone into proving it all in the most shit engine type known to man (rotaries) and we have proven it on these and others many times over if you don't want to guess, or the opportunity cost is an issue to you, then PM me and we can gladly help you get on it

New D4 dash set up being configured below.





__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"

Last edited by RICE RACING; 20-04-2019 at 02:54 PM.
Reply With Quote
  #433  
Old 31-12-2018, 02:23 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: RICESP Water Injected RX7

https://youtu.be/n6c7dhYsfZY

Too much power with WM50, means you need the best electronic control and calibration to match
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #434  
Old 01-01-2019, 06:04 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Post Re: RICESP Water Injected RX7

https://www.youtube.com/watch?v=Hlbc...ature=youtu.be


Though I would put together a little bit of real knowledge gained over the years, this is but a small sample I have (know a bit about rotaries lol).... lots of it is pertinent to any engine really though, specially those piston engine types who try to imitate rotary idle characteristics with big cams

Some of it is of relevance in that you can go 'too big' and end up with an engine that is overly sensitive to map/tip ratio, also one that is peaky and generally a shitbox overall in every category, narrow power band, excessive fuel use, not as drivable etc.
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #435  
Old 12-02-2019, 04:47 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: RICESP Water Injected RX7

Got another FACT v's FICTION car that unlike the pretenders works and is fast, all on petrol and water injection.

Mitsubishi EVO9
EFR turbo
WI direct port set up



__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #436  
Old 13-02-2019, 07:21 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: RICESP Water Injected RX7

EVO now 100-150kph 3rd gear in 2.266 seconds 'low boost' all thanks to water injection
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #437  
Old 13-02-2019, 08:17 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: RICESP Water Injected RX7

frightening power
__________________
Richard L
aquamist technical support
Reply With Quote
  #438  
Old 13-02-2019, 08:59 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Exclamation Re: RICESP Water Injected RX7

Quote:
Originally Posted by Richard L View Post
frightening power
But wait......... there is more! Fixed the miss fire, made it faster than the Datsun, still got some boost left too

100-150kph ~1.91 seconds



__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #439  
Old 14-02-2019, 09:22 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Thumbs up Re: RICESP Water Injected RX7

Another water injected animal

https://www.youtube.com/watch?v=7OzQ...ature=youtu.be







__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #440  
Old 15-02-2019, 07:32 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: RICESP Water Injected RX7

Customers words just in: (After doing multiple back to back 100-200 kph tests)

"And this was after heatsoaking it properly, and sitting on the side of the road, on a hot afternoon. Solid car. Lol"

Keep in mind as log proves no flat shift rubbish, just real road car, syncro gearbox, pump petrol and water injection FTMFW !



Comp of some other nuggets

__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 04:30 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.