waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 17-10-2013, 01:29 AM
Mayhem Mayhem is offline
Junior Member
 
Join Date: Oct 2013
Location: California
Posts: 1
Default HFS flow led blinking

Just installed the HFS-4 on my 997 Turbo. Just a quick question regarding the gauge.

When I come to set LED on the SC potentiometer to display 5-6 bars the last bar always blinks. No matter how slow I move the SC. If I go all the way to full flow it is fine meaning all 8 bars light up but if in between it will blink no matter what I do.

Love the quality of this kit and can't wait to tune it
Reply With Quote
  #2  
Old 19-10-2013, 10:06 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: HFS flow led blinking

Check the routing of the sensor harness, there may be some induced signal from neighbouring cable, superimposing onto the sensor cable.

Send a picture of the FAV and jet installation. It could be too far.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:29 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.