waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #71  
Old 24-11-2015, 12:22 AM
HYDE16 HYDE16 is offline
Member
 
Join Date: May 2014
Location: Morris County, NJ
Posts: 47
Default Re: Pump starts then stops within a second. MKVI GTI - HFS-4

Pull the jets out, jump the board to spray and check the output/pattern. You should be pulling your jets out to clean them once and a while. I pull mine out in Spring (after Winter) and then again towards the end of Summer to clean them out.

As for your failsafes, open the WL and WH all the way to disable the failsafes and see if the problem still happens. If it was your failsafe your car would open the wastegate to dump boost and the car would die off in terms of power.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 03:31 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.