waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Avoiding Disaster

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 22-11-2011, 12:02 PM
jueshen jueshen is offline
Junior Member
 
Join Date: Nov 2011
Location: South Africa
Posts: 17
Default Nozzle Problem

Hi Guys,

new to the forum im running an aquamist hfs2 (circuit board says hfs3) on my 2007 pgti 1.8t stage 2 unitronic.

recently i notcied its using less wm mix or sometimes non

so took everythin apart and found the fault was the nozzle itdelf both nozzles 09.mm and 1mm were totally blocked allowing no water / meth thu

dissasembeled the nozzle and when i removed inner copper swirly piece i found out that somehow both of them wile in use screwed themsleves shut!

this kit was brand new and i am sure its going to screw itslef shut again and im not sure if having a filter will avoid this? (both nozzles have no filter)

what should i do?

tx
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:19 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.