waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum > HFS-4 user manual and wiring diagrams

Reply
 
Thread Tools Display Modes
  #31  
Old 05-05-2015, 08:50 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

Quote:
Originally Posted by jdraps13 View Post
Yes I sorted that out now use two posi locks instead of just the one lower limit failsafe is still giving me s hard time tho
Failsafe has to be set in real time. Since I am not going to be there. I need you to be my eyes and ears.

I like you to do some test for me:

1. Put the DHB jumper to DFS for the time being to disable the failsafe.
2. Move the PRK jumper to FDC. This shows the fuel flow.

Tell me how many bar you see on the gauge at wot.

Just a matter of interest, could you not get any support from your supplier?
__________________
Richard L
aquamist technical support
Reply With Quote
  #32  
Old 05-05-2015, 11:09 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

Did what you asked and 7 bars popped up on gauge at wot, no feedback from supplier cause they have never installed Aquamist before
Reply With Quote
  #33  
Old 06-05-2015, 11:58 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

Thank you.

1. Your fuel idc is maxed out around 70-75%. Now reinstate the jumper back to PRK.
2. DFS back to DHB to reinstate the failsafe.

Next steps:
3. Set the THRES to 10am
4. Set the "GAIN" trimmer to 1pm to match the f-idc for the aquamist.

Questions:
5. Tell me how many bars on the gauge this time.

So far so good
__________________
Richard L
aquamist technical support
Reply With Quote
  #34  
Old 08-05-2015, 12:25 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

ok sounds good I'll get back to ya

Last edited by jdraps13; 08-05-2015 at 12:47 PM. Reason: Fucked up
Reply With Quote
  #35  
Old 09-05-2015, 12:19 AM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

Quote:
Originally Posted by Richard L View Post
Thank you.

1. Your fuel idc is maxed out around 70-75%. Now reinstate the jumper back to PRK.
2. DFS back to DHB to reinstate the failsafe.

Next steps:
3. Set the THRES to 10am
4. Set the "GAIN" trimmer to 1pm to match the f-idc for the aquamist.

Questions:
5. Tell me how many bars on the gauge this time.

So far so good
At wot I am getting 6 bars on gauge
Reply With Quote
  #36  
Old 09-05-2015, 09:35 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

Now set your WL to 10am and WH at 2pm, does the failsafe trigger ttis time?
__________________
Richard L
aquamist technical support
Reply With Quote
  #37  
Old 09-05-2015, 02:11 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

No failsafe triggered
Reply With Quote
  #38  
Old 09-05-2015, 02:13 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

And my spray seems to be sorta tic, anytime Idc is over 9 in spraying, slow accelerations cruising on highway? Wierd
Reply With Quote
  #39  
Old 12-05-2015, 02:18 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

What is the serial number of your controller?
__________________
Richard L
aquamist technical support
Reply With Quote
  #40  
Old 12-05-2015, 03:35 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

Serial number is #121688
It's like it doesn't like my idc, sprays all the time pretty much even low throttle blimps and cruising, should I try running it boost based?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:20 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.