#1
|
|||
|
|||
Differences between v2 and v3?
Hi,
I have searched but haven't been able to find what the differences between v2, v3 and later versions are. Could someone please help me out? Best regards, Per |
#2
|
|||
|
|||
Re: Differences between v2 and v3?
The differences between v2 and v3
HFS3... 1. V2 has one flow table compared to 3 on v3. It may not read Di signals after 2010. 2. V3 has a more advanced Di signal decoder that will handle 99% of the engines up to 2015 3. V3.1 can decoder 99% of DI signals from 2008 to now. Flow sensor/failsafe construction, gauge and controller circuitry has also been improved.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: Differences between v2 and v3?
Quote:
Is the hardware interface between the old and new versions, the same? Ie connectors for jets, hoses, etc. |
#4
|
|||
|
|||
Re: Differences between v2 and v3?
the same other than the user port. V3 has a few more I/O ports
__________________
Richard L aquamist technical support |
|
|