Aquamist 2d Install ? on an FD?

[Tem120]

Sorry for hte late replies







the first one is where the injector I tapped is .

second one is the actual injector plug notice hte black/yellow , and green wire

Last one is 4 green wires one solid and 3 with different colored stripes which kind of match your diagram . well the 4 green wires are the forward most , and the rest is well the plug

[Richard L]

It appears the wiring can be taken from the ECU. See below:

[Tem120]

hmm I have a question I dont know if this is the correct place to ask . but maybe someone can point me in the right direction ..


So when the A/I is working and functioning correctly . should it affect my Air/fuel Ratios?

will it read richer as the alcohol burns ? or will it read as if it wasn't there .

[Tem120]

how do I adjust when it injects water?

its currently injecting at around 7 PSI . I'd like fori t to inject earlier

[Rub20B]

Having no experience with the kit itself I would def take either of the secondary injectors. Simply because you only need water in a boosted area, and the sec inj are on when being boosted. Using the primaries could also work but they can reach consoderable duty cycle with no or very low boost just before the secondaries get ramped in.