waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #21  
Old 02-03-2016, 11:06 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FAV not working from controller

Where did you measure the 13.5ohm from?
__________________
Richard L
aquamist technical support
Reply With Quote
  #22  
Old 03-03-2016, 06:16 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FAV not working from controller

Given up?

I suspect the cable is damaged.
__________________
Richard L
aquamist technical support
Reply With Quote
  #23  
Old 03-03-2016, 07:21 PM
boostsys boostsys is offline
Junior Member
 
Join Date: Mar 2016
Location: Ukraine
Posts: 14
Default Re: FAV not working from controller

When I opened FAV connector one of the wire was damaged, they are very thin. I will solder it and will look on.
I'm measured 13.5 Ohms by cheap Chinese multimeter, maybe that's the point?
Reply With Quote
  #24  
Old 03-03-2016, 08:25 PM
boostsys boostsys is offline
Junior Member
 
Join Date: Mar 2016
Location: Ukraine
Posts: 14
Default Re: FAV not working from controller

I have soldered wire. Now between red and black pins resistance 13.5 Ohms.
But testing the spray pattern of the jets steel have been failing, FAV doesn't work.
Reply With Quote
  #25  
Old 03-03-2016, 09:02 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FAV not working from controller

We are making progress.

Can you send a picture of your repaired location.
__________________
Richard L
aquamist technical support
Reply With Quote
  #26  
Old 03-03-2016, 09:12 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FAV not working from controller

I have had someone calling me this afternoon regarding purchasing a HFS3 controller, was it related to you?
__________________
Richard L
aquamist technical support
Reply With Quote
  #27  
Old 03-03-2016, 10:08 PM
boostsys boostsys is offline
Junior Member
 
Join Date: Mar 2016
Location: Ukraine
Posts: 14
Default Re: FAV not working from controller

Now I have nothing to make photo with.
Yes, there was a telephone call to you from us.
Reply With Quote
  #28  
Old 03-03-2016, 10:22 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FAV not working from controller

Can you describe how the red cable got damaged?

I like to move on and and make some tests to establish the signal to the FAV is working, using the DVM you have. Make sure the FAV is connected.

1. Measure the voltage of pin 1 with the system on. (should be 12V)
2. Link SYS
3. Measure the voltage at the same place again. It should be OV

I wait for you results.
__________________
Richard L
aquamist technical support
Reply With Quote
  #29  
Old 05-03-2016, 08:01 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FAV not working from controller

I gathered you have ordered a new controller. I hope this will solved the problem. If there is a short circuit on the cable it can easily damage the driver transistor. Please check the damaged cable is repaired properly and well insulated against the environment.

Can you explain how the cable got damaged?
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:02 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.