|
|
#1
07-04-2011, 01:27 PM
|
|||
|
|||
help with road test jet....
in a usdm 07 sti
i installed the hfs-3 ive tested the jets they work now im at the point to avtivate the system by f-idc i set the far left trimmer to fully cc and it just runs constantally? in the book it says a noticable spray not full on, did i miss something? also i tryed the road test and no spray there either thanks.... Last edited by flyers7732; 07-04-2011 at 02:33 PM. 
|
|
#2
07-04-2011, 01:53 PM
|
|||
|
|||
|
Re: help with road test jet....
another thing is that im not offically tuned i have a tune to get me around with the new motor, could it be that there isnt enough load on the motor to make it spray?
|
|
#3
07-04-2011, 06:29 PM
|
|||
|
|||
|
Re: help with road test jet....
Ideally, set the threadhols at the lowest point and IDC gain just before the 90% red led comes on.
What is the water jet size?
__________________
Richard L aquamist technical support
|
 |
|
|
Linear Mode
