waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum > HFS-4 user manual and wiring diagrams

Reply
 
Thread Tools Display Modes
  #1  
Old 21-03-2012, 05:22 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Mazdaspeed 3






===============================





===============================



__________________
Richard L
aquamist technical support
Reply With Quote
  #2  
Old 18-04-2012, 09:02 PM
skeurton skeurton is offline
Junior Member
 
Join Date: Apr 2012
Location: Hampton, VA
Posts: 11
Default Re: Mazdaspeed 3

I have an aftermarket electronic boost control solenoid running in 3-port interrupt mode. It plugs into the stock harness, just like the stock solenoid. The same principles apply when tuning for it, but it requires much less wastegate duty cycle (at least 25% less) than the stock solenoid.

Can I still follow the wiring diagram above? Or does it need to be wired differently? Here is a link to the product and manual:

Product:
http://www.grimmspeed.com/catalog/pr...roducts_id=194

Manual:
https://www.grimmspeed.com/install_g...MazdaSpeed.pdf
Reply With Quote
  #3  
Old 19-04-2012, 07:18 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

Yes, you can continue using the above wiring diagram. We just cut the PWM signal to the BCV. It will work with any valve.

One reason for a lower duty cycle is needed on the grimmmspeed valve is probably due to slightly larger orifice in the ports.
__________________
Richard L
aquamist technical support
Reply With Quote
  #4  
Old 15-12-2012, 08:24 PM
yokimazoku yokimazoku is offline
Junior Member
 
Join Date: Aug 2012
Location: oregon
Posts: 20
Default Re: Mazdaspeed 3

im wondering what year mazdaspeed this diagram is for. I have a 2007 and im looking at the ecu connector pinout and it seems slightly different. The #1 fuel injector coil - on the sheet im looking at says its 2BA not 2BB. Is there any way to verify this?
Reply With Quote
  #5  
Old 15-12-2012, 08:33 PM
yokimazoku yokimazoku is offline
Junior Member
 
Join Date: Aug 2012
Location: oregon
Posts: 20
Default Re: Mazdaspeed 3

Nevermind that example is correct ignore that post.
Reply With Quote
  #6  
Old 13-04-2015, 11:46 AM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

Quote:
Originally Posted by Richard L View Post
Yes, you can continue using the above wiring diagram. We just cut the PWM signal to the BCV. It will work with any valve.

One reason for a lower duty cycle is needed on the grimmmspeed valve is probably due to slightly larger orifice in the ports.
Where would I cut in order for this application? Or is this something you guys do prior?
Reply With Quote
  #7  
Old 13-04-2015, 04:34 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

If you place an order from our online shop, we will make the necessary modifications for you. But do make a comment at check out to be sure.
__________________
Richard L
aquamist technical support
Reply With Quote
  #8  
Old 13-04-2015, 05:00 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

I have the kit already just wondering where the cut point is
Reply With Quote
  #9  
Old 13-04-2015, 05:11 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 3

If you have the kit already, go to page 21 of the user manual. If you have lost the used manual, you can download it from here. Version 3.
__________________
Richard L
aquamist technical support
Reply With Quote
  #10  
Old 13-04-2015, 05:20 PM
jdraps13 jdraps13 is offline
Junior Member
 
Join Date: Apr 2015
Location: edmonton alberta canada
Posts: 22
Default Re: Mazdaspeed 3

So on number 6 cut the connection to the negative?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:12 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.