Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-3 forum > HFS-3 wiring diagram to a specific model of car

Thread Tools Display Modes
Old 04-08-2015, 06:57 PM
upnorthstar upnorthstar is offline
Junior Member
Join Date: Aug 2015
Location: Toronto
Posts: 3
Default diagram for Dodge Charger Hellcat?

Hey Richard; I plan to install an HKS-3 on my 2015 Charger Hellcat...does it matter if I splice at the actual injector or tap into the appropriate pins at the Powertrain Control Module ? diagram link below...

I am also torn on whether to use the MAP signal instead of IDC...any obvious preferences with a positive displacement supercharger setup...?


thanks for your help
Attached Images
File Type: jpg Hellcat-6.2L-fuel-control-system.jpg (191.8 KB, 11 views)
Reply With Quote
Old 05-08-2015, 05:00 PM
Richard L Richard L is offline
Manufacturer sponsor
Join Date: Oct 2003
Location: England
Posts: 4,916
Default Re: diagram for Dodge Charger Hellcat?

It is easier to tap from the fuel injector, Red and green wire of the grey harness to the fuel injector.

Is there a map sensor in the drawing? I canlt seem to fine it, Do you have a higher solution diagram, it is not easy to read.
Richard L
aquamist technical support
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 02:34 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.