Custom made WI with a fail save system (see drawing inside) - waterinjection.info

waterinjection.info

		waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction
Custom made WI with a fail save system (see drawing inside)

Prev

Previous Post

Next Post

Next

#21

Old

09-03-2007, 05:10 PM

BlackWolf

BlackWolf is offline

Junior Member

Join Date: Feb 2007

Posts: 24

Default

Today I welded myself a water tank, I used 1.5mm thick stainless plate and a stainless closure, I didn't weld for long time so I had to warm-up little bit, but it turned out ok. I made couple mount points for the pump and accumulator. The tank can hold 10liter (2.64 gallon) water.

Front:

Back:

Front assembled:

Back assembled:

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Forum Rules

Forum Jump

All times are GMT +1. The time now is 08:17 AM.