|
#1
|
|||
|
|||
Re: Nozzle spray angle...
I made a test with about a 35% methanol to water mix in a clean container,
and it did get milky and it did get warm. Over ther first 24 hours there was no apparent settling or change in colour, but after 48 hours I can see a clearer layer forming at the bottom of the container. It is currently about 1/3rd of the total sample.I shall continue to observe After discussing the matter with the supplier of the methanol, it appears that he recycled a container that had previously held another product. So he has undertaken to replace the contaminated product with 20 litres decanted into a fresh new container. I shall test a sample before using it to make sure it remains clear after mixing. Cheers... jondee86 |
|
|