have qusetion please

[ysfg35]

am running my aquamist methanol injection and am very vary happy , great prodect , clean and you can feel the quality ..


anyway , i have a simple qustion :

*the system settings are working fine with my setup , in the future am going to run race fuel c16 , and i should not run methanol injection ,

in the same time i do not want to lose methanol Advantage of cooling the iats , so i decide to run less amount of methanol to cool the iats ..

as i know there are 2 way to run less methanol :

- use restrictor
- adjust the gain little down


which one is better ??? any other idea ??


btw am useing 2 jets , and i can not run just one ..


thanks

[Richard L]

Either one will work.

Gain will only affect the spray from threshold point onwards. Restrictior will reduce the entire curve.

I think lower the gain will be better as having colder air lower down helps spool up. As RPM rises, the system will not spray as much.

[ysfg35]

Originally Posted by Richard L

Either one will work.

Gain will only affect the spray from threshold point onwards. Restrictior will reduce the entire curve.

I think lower the gain will be better as having colder air lower down helps spool up. As RPM rises, the system will not spray as much.

thanks alot man .. i think restrictior will be better , cuz i do not want to adjust the settings again and again ..

[Richard L]

I suggest putting in the 0.7mm restrictor.

[ysfg35]

you are right .. will do that and see ..

thanks richard