waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 17-12-2014, 03:15 AM
Matutino Matutino is offline
Junior Member
 
Join Date: Jun 2011
Location: USA
Posts: 10
Default HFS-6 boost compensation future

I have mine hooked up to IDC but, reading the manual it states that it also has boost compensation.
How does it work? How can I take advantage of it while following IDC?

Matt
Reply With Quote
  #2  
Old 18-12-2014, 12:56 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: HFS-6 boost compensation future

Boost compensation:

If boost signal is available from the factory maps sensor, you can use this signal to offset the drop in spray volume due to manifold pressure increase.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 19-12-2014, 05:53 AM
Matutino Matutino is offline
Junior Member
 
Join Date: Jun 2011
Location: USA
Posts: 10
Default Re: HFS-6 boost compensation future

Richard,
My E36 M3 does not have a factory map sensor. Im using the OEM DME for tuning. Would adding a GM 3 bar map sensor do the trick to take advantage of the boost compensation?
I can pick up a 5v signal and hook up the other end of it to the HFS-6.
Would this work while following IDC?

Last edited by Matutino; 21-12-2014 at 04:54 AM.
Reply With Quote
  #4  
Old 23-12-2014, 04:59 PM
Matutino Matutino is offline
Junior Member
 
Join Date: Jun 2011
Location: USA
Posts: 10
Default Re: HFS-6 boost compensation future

Anyone can answer my question to Richard?
Reply With Quote
  #5  
Old 31-12-2014, 01:54 AM
Matutino Matutino is offline
Junior Member
 
Join Date: Jun 2011
Location: USA
Posts: 10
Default Re: HFS-6 boost compensation future

Quote:
Originally Posted by Matutino View Post
Richard,
My E36 M3 does not have a factory map sensor. Im using the OEM DME for tuning. Would adding a GM 3 bar map sensor do the trick to take advantage of the boost compensation?
I can pick up a 5v signal and hook up the other end of it to the HFS-6.
Would this work while following IDC?
Richard, any luck replying top my post. Is it worth it to add a 3 bar map sensor to my set up?

Last edited by Matutino; 31-12-2014 at 10:28 PM.
Reply With Quote
  #6  
Old 01-01-2015, 09:03 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: HFS-6 boost compensation future

Quote:
Originally Posted by Matutino View Post
Richard,
My E36 M3 does not have a factory map sensor. Im using the OEM DME for tuning. Would adding a GM 3 bar map sensor do the trick to take advantage of the boost compensation?
I can pick up a 5v signal and hook up the other end of it to the HFS-6.
Would this work while following IDC?
As long as the span is 5V, any map sensor will work.
__________________
Richard L
aquamist technical support
Reply With Quote
  #7  
Old 02-01-2015, 03:15 AM
Matutino Matutino is offline
Junior Member
 
Join Date: Jun 2011
Location: USA
Posts: 10
Default Re: HFS-6 boost compensation future

Yes, its a 5v map sensor.
I guess my questions is if there is a benefit of using it or not
Reply With Quote
  #8  
Old 10-01-2015, 04:49 AM
Matutino Matutino is offline
Junior Member
 
Join Date: Jun 2011
Location: USA
Posts: 10
Default Re: HFS-6 boost compensation future

Richard,
Would I see any performance benefit or not by adding it a map sensor?
Reply With Quote
  #9  
Old 14-01-2015, 06:01 AM
Matutino Matutino is offline
Junior Member
 
Join Date: Jun 2011
Location: USA
Posts: 10
Default Re: HFS-6 boost compensation future

Quote:
Originally Posted by Richard L View Post
As long as the span is 5V, any map sensor will work.
Any luck to answer my question. Is it worth it to add a Map sensor, would it add any performance? Seems worthless if you are already following idc
Please let me know

Thanks
Reply With Quote
  #10  
Old 14-01-2015, 08:38 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: HFS-6 boost compensation future

If the system is based on IDC, add a map sensor will not be beneficial. If your fuelling is good, the water/meth flow will follow.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:41 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.