waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 19-07-2010, 09:40 PM
Imtl09 Imtl09 is offline
Junior Member
 
Join Date: Apr 2010
Posts: 6
Unhappy failsafe CEL question

My HFS-6 is performing well from what I can tell. However, I have now had on three separate occasions a CEL tripped on startup. What normally happens is after I have been driving for a while, park and then restart the car the failsafe triggers the code that must then be reset. Each time this has happened the amb. temp has been >95 degrees, No problems on initial startup at all, I'll run to the store, or drive my commute home, head out a second time and on the restart the code (wastegate sol A) is setoff. The performance of the spray seems fine, etc. Any suggestions will help. Its not real problem, more of a irritant. The ecu takes a day or two to relearn parameters, timing adv, etc. after a reset.
Reply With Quote
  #2  
Old 19-07-2010, 09:42 PM
Imtl09 Imtl09 is offline
Junior Member
 
Join Date: Apr 2010
Posts: 6
Default Re: failsafe CEL question

I have had the system in for several months so the issue is not a daily occurance.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:43 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.