waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #61  
Old 26-07-2012, 03:13 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FCM Problem

If the FCM box is not closed, the hall effect sensor on the circuit board will not read the turbine of the flow sensor

Close the box and repeat test 4 and 5.
__________________
Richard L
aquamist technical support
Reply With Quote
  #62  
Old 26-07-2012, 04:40 PM
fplucid fplucid is offline
Member
 
Join Date: Apr 2012
Location: Moscow
Posts: 32
Default Re: FCM Problem

Yes, this really helped. Thanks again, Richard.
Nozzle was full of dirt - probably it got there during these several month of laying under hood unconnected.
Currently everything is fine and flow sensor shows 7 bars in "TST" mode.
You said that box should be completely closed - should I re-seal it to be 100% sure that is sealed completely?
Reply With Quote
  #63  
Old 26-07-2012, 04:46 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FCM Problem

The circuit board is epoxy dipped to protect it from the environment. But the modification you did with the black and brown wire may need further moisture protection. May be tap up the gap of the FCM will do just as well.
__________________
Richard L
aquamist technical support
Reply With Quote
  #64  
Old 26-07-2012, 04:49 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FCM Problem

The next step will be taking the car for a drive and play with the trimmers.
__________________
Richard L
aquamist technical support
Reply With Quote
  #65  
Old 02-08-2012, 04:26 PM
fplucid fplucid is offline
Member
 
Join Date: Apr 2012
Location: Moscow
Posts: 32
Default Re: FCM Problem

Thanks, Richard. Everything works just great.
I would like to build up direct port system. I think this will make sense. Which parts will be required? Can I ask to to assist and make a quote?
Reply With Quote
  #66  
Old 02-08-2012, 05:07 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: FCM Problem

How many cylinders?
__________________
Richard L
aquamist technical support
Reply With Quote
  #67  
Old 03-08-2012, 11:51 AM
fplucid fplucid is offline
Member
 
Join Date: Apr 2012
Location: Moscow
Posts: 32
Default Re: FCM Problem

standard R4
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:54 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.