waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Intercooler Effects

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-02-2006, 08:53 PM
SimonR SimonR is offline
Junior Member
 
Join Date: Dec 2005
Posts: 1
Default Question about TurboIce Paper

Hi,

I'm a noob so apologies if this is a stupid question.

The TurboIce paper (fascinating reading) contains a graph from Aquamist (page 20) which suggests that compressor exit temps at 2 bar on a 60% efficiency compessor will be 200+ degrees C. It then goes on to say (page 21 para 1) that "At full saturation the induction charge will have a significantly reduced temperature somewhere between the ambient temperature and the temperature of the injected water."

If I am interpreting this correctly, on a 20C day with water at an under-bonnet temp of 30C, a saturated charge would have a temperature of 20-30C. I am assuming that "exit temperature of compressor" means charge temperature immediately post-compressor.

I'm not suggesting that the paper is wrong, merely asking if I am interpreting it correctly. Am I? If so, this is an enormous intercooling effect and I'll start planning my WI install straight away.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:19 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.