waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 28-03-2017, 11:57 AM
Coilerer Coilerer is offline
Junior Member
 
Join Date: Mar 2017
Location: United States
Posts: 6
Default Control board not commanding FAV to open ... not true

Hello all,

I recently ordered an hfs4 kit from Jeff at howerton engineering. The kit was functioning perfectly for a few days but last week the kit stopped spraying.

Jeff and I troubleshoot it down to the controller board. There are no clogs in the system. The FAV operates perfectly when supplied with 12v. The control board has no voltage across the FAV outputs when in SYS. The FAV wiring lead is continuous. There are no scorched connectors, traces of components.

What do you guys think could be the issue?

Jeff suggested I email aquamist about it but while I wait on a reply I figured I would lost here.
Reply With Quote
  #2  
Old 28-03-2017, 10:57 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,884
Default Re: Control board not commanding FAV to open .

This is the correct place to have your aquamist problem diagnosed if you did not purchase your system from the aquamist-direct site.

Post a Hi-res picture of the top and bottom of the circuit board.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 29-03-2017, 02:07 AM
Coilerer Coilerer is offline
Junior Member
 
Join Date: Mar 2017
Location: United States
Posts: 6
Default Re: Control board not commanding FAV to open .

My dealer told me to email you directly. Changing any of the jumpers or pots did. It resolve the issue.

http://imgur.com/m9LJIU3
http://imgur.com/1JIVPwz
http://imgur.com/HFZNxpH
Reply With Quote
  #4  
Old 29-03-2017, 05:59 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,884
Default Re: Control board not commanding FAV to open .

In that case, can you tell me your first name so I can track down your email.
__________________
Richard L
aquamist technical support
Reply With Quote
  #5  
Old 29-03-2017, 06:01 AM
Coilerer Coilerer is offline
Junior Member
 
Join Date: Mar 2017
Location: United States
Posts: 6
Default Re: Control board not commanding FAV to open .

Daniel.

Thank you.
Reply With Quote
  #6  
Old 29-03-2017, 07:10 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,884
Default Re: Control board not commanding FAV to open .

Thank you. When did you email me last?
__________________
Richard L
aquamist technical support
Reply With Quote
  #7  
Old 29-03-2017, 01:11 PM
Coilerer Coilerer is offline
Junior Member
 
Join Date: Mar 2017
Location: United States
Posts: 6
Default Re: Control board not commanding FAV to open .

25 March.i will re-send it.
Reply With Quote
  #8  
Old 29-03-2017, 02:16 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,884
Default Re: Control board not commanding FAV to open .

Got it now. Found it in the spam box. sorry.

I will get back to you after a careful look.
__________________
Richard L
aquamist technical support
Reply With Quote
  #9  
Old 29-03-2017, 02:19 PM
Coilerer Coilerer is offline
Junior Member
 
Join Date: Mar 2017
Location: United States
Posts: 6
Default Re: Control board not commanding FAV to open .

Thanks so much. It been killing me, spending $1200 and not being able to use it.
Reply With Quote
  #10  
Old 31-03-2017, 06:35 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,884
Default Re: Control board not commanding FAV to open .

Are you happy with the solution so far?
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:42 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.